-
PVAC Indent molecular_beam StainlessSteel AlkaneFilm TyphimuriumBiofilm dielectric trench Defect Water Leakage #Materials Nanofiber Strontium CeNSE_IISc MagneticForce CNT CompactDisk light_emitting KevlarFiber NanoLithography LightEmission nanomechanical Oxide BismuthFerrite Anneal Phenanthrene SurfaceChange ScanningIon-ConductanceMicroscopy Stiffness plastic FFM temperature controller AFM cannabidiol Ni81Fe19 PtfeMembrane
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm