-
KevlarFiber Hexatriacontane Hydroxyapatite PECurve Inorganic FailureAnalysis LeakageCurrent Mfm ElectroDeposition Pinpoint Bmp Indent Ni-FeAlloy Al2O3 hydrocarbon BFO Ucl Polydimethylsiloxane SKPM Heating polymeric_arrays Zhi LogAmplifier LowDensityPolyethylene MLCC Water INSPParis Perovskite light_emitting Hair Patterns sputter Conductive AFM non_contact MoirePattern
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co/Cr/Pt
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 1Hz
- Pixel: 512×512
- Lift height: 40nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 1Hz
- Pixel: 512×512
- Lift height: 40nm