-
Electrical&Electronics AEAPDES hetero_structure LithiumNiobate cooling Bmp Composition Aluminium_Oxide EPFL ContactModeDots PANI PS_LDPE ForceVolumeImage ElectroChemical Defects MLCC BismuthFerrite Insulator Collagen Hydroxyapatite Polyimide Silver mono_layer University_of_Regensburg thermoplastic_elastomers Sphere FFM polymeric_arrays silicon_carbide FastScan Multiferroic_materials bias_mode SRAM Sio2 GaP
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
NiFe
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1.2μm×1.2μm
- Scan Rate: 0.5Hz
- Pixel: 256×256
- Lift height: 20nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1.2μm×1.2μm
- Scan Rate: 0.5Hz
- Pixel: 256×256
- Lift height: 20nm