-
HighResolution Solar Photovoltaics BTO MagneticArray Solution Semiconductor biocompatible ContactModeDots MoS2 Piezoelectric cannabis WS2 BariumTitanate Beads TransitionMetal flakes DLaTGS small_scan PANI PinpointNanomechanicalMode OpticalElement Array Dr.JurekSadowski Multiferroic_materials Polytetrafluoroethylene ItoGlass Conducting ULCA Friction SingleCrystal HOPG lithography self_assembly Neodymium
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm