Join us for a webinar to learn about one of the cutting-edge applications of nanoscientific research:
3D Printing: Viscous Solutions
Join us for a series of lectures featuring materials sciences expert Prof. Rigoberto Advincula of Case Western Reserve University! Our new 2018 series with Prof. Advincula is focused on giving audiences a deeper look into various aspects of 3D printing. With applications in many fields such as manufacturing, medicine, architecture, and custom art and design, 3D printing is be at the forefront of many commercial technologies for years to come. Our next entry in this series is focused on how viscous solutions are utilized in 3D printing. Convention 3D printers use basic print heads that only allow for thin liquids to be pass through when printing objects. Thin liquids by nature are composed of shorter molecular chains which translate to increasingly brittle and fragile structures once the liquid has cured. To get around this problem, developers have been hard at work creating print heads that can handle liquids wich much longer molecular chains and are therefore thicker than materials used in the past. Join us as Prof. Advincula surveys the field of 3D printing research and development through the lens of the latest in nanoscale characterization techniques.
Presented by Prof. Rigoberto AdvinculaMacromolecular Science & Engineering, Case Western Reserve University
About Prof. Rigoberto Advincula
Prof. Rigoberto Advincula, Director of the Petro Case Consortium, is recognized industry-wide as an expert regarding polymer and materials challenges of the oil-gas industry. He is currently a Professor with the Department of Macromolecular Science and Engineering at Case Western Reserve University and is the recipient of numerous awards including Fellow of the American Chemical Society, Herman Mark Scholar Award of the Polymer Division, and Humboldt Fellow.
Register by clicking session below:
Friday, February 16, 2018
ONLINE REGISTRATION PAGE
- PST (UTC-8): 9:00 AM - 10:00 AM
- EST (UTC -5): 12:00 PM - 1:00 PM
- BST (UTC): 5:00 PM - 6:00 PM
- CEST (UTC +1): 6:00 PM - 7:00 PM
|
|
Webinar Details
|
Date: Friday, Feb 16, 2018
Time:
9:00 am – 10:00 am (PST)
San Francisco, Los Angeles
12:00 pm – 1:00 pm (EST)
Boston, New York
5:00 pm – 6:00 pm (BST)
London
6:00 pm – 7:00 pm (CEST)
Paris, Rome
|
|
|
3D Printing w/ Viscous Liquids
New printing heads for 3D printers are enabling projects that require increased control over extruded materials and end-products with higher durability.
|
|
System Requirements Go To Webinar
PC-based attendees
Windows XP, Windows Server 2008 or later
Mac-based attendees MacOS 10.8 or later
|
|