-
VortexCore YszSubstrate OpticalWaveguides Biofilm OxideLayer Dr.JurekSadowski EPFL AnodizedAluminumOxide Layer silicon_oxide Oxidation SSRM aluminum_nitride Grain CBD Implant LogAmplifier ScratchMode FFM LiquidCrystal ShenYang Treatment ScanningIon-ConductanceMicroscopy F14H20 InorganicCompound Alkane CarbonNanotube Jason Pvdf Epoxy Formamidinium_lead_iodide PolymerBlend HighAcpectRatio Plug Optic
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Christmas Ball Lithography on Si
Create oxidation layers on bare Si surface using bias mode of lithography.
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: AD-40-SS (k=40N/m, f=200kHz)
- Scan Size: 40μm×40μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: -10V for patterened area
- Scan Mode: Lithography
- Cantilever: AD-40-SS (k=40N/m, f=200kHz)
- Scan Size: 40μm×40μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: -10V for patterened area