-
ContactModeDot PetruPoni BTO Hole conductive Boundary UnivOfMaryland CBD Thermoplastic_polyurethane Polyethylene Wang CrossSection P3HT Stiffness Aluminium_Oxide ReflexLens SurfaceOxidation semifluorinated_alkane Tungsten_disulfide Hafnia SrO food Piezoresponse Heat CuSubstrate Scratch NeodymiumMagnets Floppy nanobar ThermalProperties Molybdenum_disulfide piezoelectric force microscopy TungstenThinFilmDeposition FM_KPFM StrontiumTitanate
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Fe-Nd-B Alloy
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm