-
Techcomp LowDensityPolyethylene Piezo Polypropylene PS_PVAC Growth DataStorage CrAu Pinpoint PpLdpe LDPE MultiferroicMaterials Magnets FailureAnlaysis ScanningIon-ConductanceMicroscopy Pattern biocompatible Fiber Vanadate Varistor Conducting IndiumTinOxide TungstenThinFilmDeposition Hair CuFoil CntFilm Wafer LateralForce FailureAnalysis cannabidiol Plug Patterns CalciumHydroxide MfmAmplitude CVD
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Taegeuk Mark Lithography on PZT
Re-arranged the domain pole direction on PZT surface using bias mode of lithography.
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: PPP-ContScPt (k=0.2N/m, f=25kHz)
- Scan Size: 35μm×20μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: 10V for patterned area
- Scan Mode: Lithography
- Cantilever: PPP-ContScPt (k=0.2N/m, f=25kHz)
- Scan Size: 35μm×20μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: 10V for patterned area