-
IndiumTinOxide SingleCrystal Organic Glass TCS Phase Polyurethane Gallium PolyimideFilm TemperatureControlledAFM Chungnam_National_University dielectric_trench Foil Vinylpyridine Polydimethylsiloxane MLCC Sapphire Spain HexagonalBoronNitride pulsed_laser_deposition AdhesionForce silicon_oxide silicon_carbide PetruPoni_Institute Device IIT-chennai LMF DLaTGS Yttria_stabilized_Zirconia solar_cell Sidewall TungstenDeposition AtomicSteps ScanningKelvinProbeMicroscopy phase_change
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co/Cr/Pt
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 1Hz
- Pixel: 512×512
- Lift height: 40nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 1Hz
- Pixel: 512×512
- Lift height: 40nm